There is a choice: holders for smartphones on all occasions

⚑ 06 Jul 2017г. Category: Articles | ❤ 1054 | Reviews: 0

Thanks to its large display and loud speakers, a variety of communication interfaces and built-in cameras range a smartphone are almost limitless. Everyone uses a mobile device at their discretion, but almost always possible to identify the pattern: the user holds the gadget in hand before the eyes or in the immediate neighborhood. Most of the daily activities we need both hands free, and in some cases solid and sure grip is a must, for example, while driving any vehicle. But how to use useful properties of the smartphone, keeping your hands free? We bring you the most interesting and functional solutions for fixing smartphones in the car, bike or home.

The smartphone in the car occupies a special position right for a number of reasons. On the one hand, is a convenient device to navigate through unfamiliar terrain, communication with friends and family, access to music and radio even outside the city. On the other — by law in many countries while driving a car using a smartphone is prohibited, including carry on a conversation without special technical devices. But no one bothers to install a device with a voice activated assistant in a special holder, which provides constant and easy access to the screen. Usams proposed car holder with extendable legs, rubber on the inside. As between them, the gadget is held firmly in place, not dropping even during a sudden stop.

In-car holder is mounted to the ventilation grating. Thanks to the rotating base holder from Usams can be set at any angle. By the way, even outside the machine work to install the smartphone in a convenient position, attach it to any thin plastic card. Holder suitable for smartphones with width from 58 to 84 mm.

The company Jerefish invented universal mount: it is tightly fixed on the front of the car or steering the Bicycle frame. Any smartphone with a diagonal of sits between the two legs of the holder like a glove due to the anti-slip pads.

One of the most popular holders — windshield mount on a flexible stem with a swivel cradle for smartphone and four clips on the sides. This is a convenient way to adjust the position of the device exactly as it is necessary for you, including horizontal and vertical position.

The only drawback of such a holder — mounting method, which is welcome not all the drivers. If for you this is a critical moment rate model mount mirror rear view.

A clamp for a smartphone to fasten on the front panel or on the windshield. Another distinctive moment is the sliding rod, which fastens the mobile device. In this way, you can conveniently set the smartphone closer to him or Vice versa, as far as possible to the window.

Those who make regular long trips in unfamiliar places and needs constant navigation, we recommend you to pay attention to the special mounts for the helm. The only limitation is the size of the free space inside the wheel well: large smartpay may not fit in this holder.

Another simple way to always keep your mobile device always in view — anti-slip Mat size 18х13 see It is made of very grippy silica gel and holds on even small tablets. Some drivers are not afraid to glue the mats on the steep part of the dashboard, installing the smartphone at an acute angle to the floor, however, this method is still fraught with accidental fall of the gadget on the floor. The right decision is horizontally on the dashboard near the windshield, where the device just will not fly under the feet of the driver or passengers during heavy braking.

Advanced Mat with high sides and a special guard — they can set smartphones, small tablets or other important items, such as sunglasses or a work permit. In the holder there is a place to store junk. By the way, for an additional fee you can purchase a similar holder for smartphones with magnetic charger and universal adapter to Lightning, micro-USB and USB Type-C.

Particular market segment is of magnetic holders for smartphones, which are installed in the grille of the air conditioner or using the adhesive backing to attach on any surface. The latter can be used at home, as the keys and other metal objects are anchored securely to the holder. Despite its weight, the device is made of metal one touch is firmly fixed on a magnetic holder and without difficulty detached. All you can not worry about reliability — even sports manner of driving does not lead to the fall of the smartphone on the floor.

Another universal magnetic holder. Unlike the previous static fixed holders, this model rotates almost 360° and provides access to the smartphone as the driver and passenger.

The company regularly releases Nillkin unusual and distinctive accessories for smartphones. Distinguished manufacturer of the on sale magnetic holder for smartphone with wireless charging function. The holder is connected to the electric circuit of the car via a USB-compatible charger for the cigarette lighter. When you install the smartphone with wireless induction coil immediately starts replenishing the battery charge.

If the gadget is made of glass or plastic and not magnetic to such retainers, there are several solutions. For example, to stick on the rear panel ring made of metal — it will provide a firm hold on any type of magnetic holder. Outside of the car can be put in the ring finger, and then the mobile device will be insured against accidental falling to the ground. Home install smartphone horizontally on the table — bent ring performs the role of strong supports.

Each of these car holders, it may seem unreliable, although this is not so. Skeptical readers, we offer the ultimate solution — a car holder for smartphone made of metal from Rock. Four corner mounting will not break under any circumstances, thus the mobile design allows flush fit clips under specific diagonal smartphone.

If you think that smartphones in the car are installed exclusively for the driver and the sitting next passenger, I hasten to reassure — it is not so. For large smartpads and tablets were invented by a clever design with sliding clips on the metal rod. This solution is useful primarily to parents to take the child interesting cartoons during the tedious journey.

In urban environments more and more people do not prefer cars, bikes and motorcycles. And even in the middle lane of travel on two-wheeled transport possible maximum six months, even in these few months come to the aid of a reliable retainer for a smartphone with a sealed front cover with transparent window. This is a very logical and thought-out solution through the transparent wall of the smartphone and all the functions (answering incoming calls, switch music, etc.), and during long-distance tours the gadget will be useful to check a route.

Mounting of open typein which the recorded smartphone rubberized legs on the sides and secured with an elastic corners made of silicone.

The owners of “Apple” smartphones and fans of extreme driving we recommend you to pay attention to a powerful sealed case of plastic and metal, in which the smartphone is highly protected from all potential negative impacts, including rain, wind and hail. Provides outputs for wires, if you suddenly want to recharge the device during the path or to connect a wired headset. Special design allows you to detach the iPhone from the case holder and then quickly return it to the place before resuming the trip.

Task convenient installation of the smartphone on a flat surface in the home is always relevant. Watching movies, reading books, socializing in a video conference is conveniently carried out in parallel with other activities, for example, for food or while washing dishes. The most simple solution — a miniature stand of plastic with a foldable design that will keep the iPhone small and large SmartPad on Android.

Advanced stand from Ugreen made of solid plastic that will withstand including the installation of the tablet. Main feature — adjustable angle at which you can install mobile device for comfortable viewing videos.

Stand made of aluminium for those who want to be sure of the reliability of the design where you installed expensive gadget. A nice bonus is the presence of a neck under the wire for simultaneous use of your smartphone or tablet and it is charging.

Stand for the lazy, which will dock literally any exposed surface. Long flexible stem can take any position to the desired angle, so if you suddenly wanted to move the smartphone closer to your eyes, it can be done with just one hand movement.

Modification of “lazy” stands with a full USB connector on one end and micro-USB, Lightning or USB Type-C on the other. It is necessary for convenient charging of your smartphone without departing from its intended use. As the previous model, the stand is able to take the most sophisticated provisions for comfortable use.

Need to recharge the smartphone, but no sockets near the Desk or bedside? Not a problem, carry a tiny, but extremely practical shelf for the socket, which is fixed on the plug of the charger and holds on a smartphone while charging. By the way, while the phone is not charging, the stand can be used as a coil conductor to the one not tangled in your bag or pocket.